-
Buffalo Bore Ammunition 45 Auto Rim (Not ACP) +P 200 Grain Jacketed Hollow Point Box of 20
IMPORTANT INFORMATION ABOUT THE HEADSTAMP ON THIS BRASS:Â Due to limited supplies of brass, Buffalo Bore has begun loading +P and +P+ ammunition in brass that may not be indicated as such on the headstamp. Example: 9mm Luger +P+ ammunition may be designated as 9mm Luger +P or simply 9mm Luger on the headstamp.
Buffalo Bore loads their ammunition up to maximum SAAMI specifications, which delivers devastating performance on a wide range of game. Please note that this ammunition is not intended for older pre war revovers. It is made for modern firearms only, as some of the ammunition could damage older and weaker firearms. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
Owner of Buffalo Bore Tim Sundles on Buffalo Bore 45 Auto Rim +P Ammunition:
You’ve been asking for a couple +P 45 AUTO RIM loads for a long time, so by popular demand, here they are. Both loads are using high quality Starline brass. We’ve also incorporated a flash suppressed powder so you can shoot in the dark without blinding yourself and this is important because over 95% of all civilian shootings in the USA occur in low light when the criminal element is at work. Both of these loads are the equivalent of +P+ 45 ACP ammo or as it is also known, 45 Super. These are very stout loads, but will not harm modern 45 ACP revolvers, nor will these loads harm any post war 45 ACP revolvers. Feel free to safely shoot these loads in any post war 45 ACP revolver that is in normal good operating condition.
Check out the below velocities fired from personal real world revolvers, NOT test barrels. You’ll notice that the new S&W 4 inch Mt. Gun gives speeds almost as fast as the older S&W revolvers with 5.5 and 6.5 inch barrels. This is NOT a typo. It simply shows that the new S&W revolvers are made to much tighter tolerances than the older S&W revolvers and therefore give higher velocities per inch of barrel.
Item # 32B – 200gr. Jacketed Hollow Point bullet
- S&W Mountain Gun, 4 inch bbl = 1197 fps
- S&W Model 325 (scandium) 2.5 inch bbl = 1080 FPS
- S&W 1955 Target (25-2) 6.5 inch bbl = 1249 FPS
CAD $50.32 -
Buffalo Bore Ammunition 45 Auto Rim (Not ACP) 200 Grain Jacketed Hollow Point Box of 20
Buffalo Bore loads their ammunition up to maximum SAAMI specifications, which delivers devastating performance on a wide range of game. Please note that this ammunition is safe to use in older prewar revolvers in proper working condition. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
Owner of Buffalo Bore Tim Sundles on Heavy 45 Auto Rim Ammunition:
You’ve been asking for a couple heavy 45 AUTO RIM standard pressure loads, so by popular demand, here they are. Both of these loads utilize high quality Starline brass. We’ve also incorporated flash suppressed powder so you can shoot in the dark without blinding yourself and this is important because over 95% of all civilian shootings in the USA occur in low light when the criminal element is at work. Both of these loads are the ballistic equivalent of +P 45 ACP loads, yet they operate at standard 45 ACP pressures. These loads are safe to use in ANY 45 ACP revolver that is in normal operating condition, including ANY model 1917 Colt or S&W revolver.
Check out the below velocities fired from personal real world revolvers, NOT test barrels. You’ll notice that the new S&W 4 inch MT Gun gives velocities almost as fast as the older S&W revolvers with 5.5 inch and 6.5 inch barrels. This is not a typo. It simply shows that the new S&W revolvers are made to much tighter tolerances than the older S&W revolvers and therefore give higher velocities per inch of barrel.
Item # 31B – 200gr. Jacketed Hollow Point bullet
- S&W Mountain Gun, 4 inch bbl = 1033 FPS
- S&W Model 325 (scandium) 2.5 inch bbl = 950 FPS
- S&W Model 1917 (1937 production) 5.5 inch bbl = 1046 FPS
- S&W 1955 Target (25-2) 6.5 inch bbl = 1063 FPS
CAD $73.44 -
Buffalo Bore Ammunition 45 Auto Rim (Not ACP) 225 Grain Hard Cast Lead Wadcutter Box of 20
Buffalo Bore loads their ammunition up to maximum SAAMI specifications, which delivers devastating performance on a wide range of game. Please note that this ammunition is safe to use in older prewar revolvers in proper working condition. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
Owner of Buffalo Bore Tim Sundles on Heavy 45 Auto Rim Ammunition:
This 225gr. full profile wad cutter, 45 auto rim, is the most deadly standard pressure load ever devised for the 45 auto rim cartridge. It utilizes the same bullet as our 45 colt ANTI-PERSONNEL ammunition (Item 3I) and because of popular request to have that bullet loaded into 45 auto rim ammo, here it is.
This bullet will penetrate around 28 inches and makes a permanent crush cavity because of its wad cutter profile. This load is the power/pressure level equivalent of 45 acp+P ammo and is safe to use in all modern 45 acp revolvers, including any/all (even pre war) 1917 model revolvers in normal operating condition.
Flash suppressed powders are used in this ammo so the shooter will not be blinded by his own gunfire and gives a tactical advantage.
The 225gr. wad cutter bullet is hard cast (not lead) and is properly lubed and will not substantially lead foul your barrel even after extensive shooting sessions, nor will the bullet fragment, smear or mushroom on impact with flesh and bone, thus insuring very straight and deep penetration with a consistent crush cavity throughout its path.
CAD $66.64 -
Buffalo Bore Ammunition 45 Auto Rim (Not ACP) 255 Grain Hard Cast Lead Flat Nose Box of 20
Buffalo Bore loads their ammunition up to maximum SAAMI specifications, which delivers devastating performance on a wide range of game. Please note that this ammunition is safe to use in older prewar revolvers in proper working condition. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.
Owner of Buffalo Bore Tim Sundles on 45 Auto Rim Ammunition:
You’ve been asking for a couple heavy 45 AUTO RIM standard pressure loads, so by popular demand, here they are. Both of these loads utilize high quality Starline brass. We’ve also incorporated flash suppressed powder so you can shoot in the dark without blinding yourself and this is important because over 95% of all civilian shootings in the USA occur in low light when the criminal element is at work. Both of these loads are the ballistic equivalent of +P 45 ACP loads, yet they operate at standard 45 ACP pressures. These loads are safe to use in ANY 45 ACP revolver that is in normal operating condition, including ANY model 1917 Colt or S&W revolver.
Check out the below velocities fired from personal real world revolvers, NOT test barrels. You’ll notice that the new S&W 4 inch MT Gun gives velocities almost as fast as the older S&W revolvers with 5.5 inch and 6.5 inch barrels. This is not a typo. It simply shows that the new S&W revolvers are made to much tighter tolerances than the older S&W revolvers and therefore give higher velocities per inch of barrel.
Item # 31A – 255gr. hard cast flat nose bullet
- S&W Mountain Gun, 4 inch bbl. = 869 FPS
- S&W Model 325 (scandium) 2.5 inch bbl. = 795 FPS
- S&W Model 1917 (1937 production) 5.5 inch bbl. = 880 FPS
- S&W 1955 Target (25-2) 6.5 inch bbl. = 875 FPS
Item # 31A was designed for deep penetration with no bullet expansion. It will shoot through stick frame and dry wall construction walls and through both doors on a 2003 Dodge Ram or through a black bears, etc. It was designed for, among other things, outdoor use including black bear protection. Expect around 27 inches of penetration.
CAD $66.64