IMPORTANT INFORMATION ABOUT THE HEADSTAMP ON THIS BRASS: Due to limited supplies of brass, Buffalo Bore has begun loading +P and +P+ ammunition in brass that may not be indicated as such on the headstamp. Example: 9mm Luger +P+ ammunition may be designated as 9mm Luger +P or simply 9mm Luger on the headstamp.

Buffalo Bore loads their ammunition up to maximum SAAMI specifications, which delivers devastating performance on a wide range of game. Please note that this ammunition is not intended for older guns. It is made for modern firearms only, as some of the ammunition could damage older and weaker firearms. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.

Owner of Buffalo Bore Tim Sundles on 380 +P Ammunition:

The 380 auto inhabits a valuable and useful place in our society, mostly because of the easily concealable, tiny pistols chambered for it. HOWEVER, because of the very limited size of the cartridge, it is plagued with limited power and therefore most of the existing ammo in 380 auto suffers from not being reliable as a man-stopper. We’ve studied and played with nearly all of the existing available 380 ammo and find it wanting as a reliable means of self defense.
This 380 Auto+P ammo will better all American made 380 Auto ammo by 150 fps to 200 fps in all bullet weights we make. This is a serious improvement in this typically anemic cartridge. This 380 auto+P ammo is more powerful than the typical 38SPL ammo made by most American ammo makers and you’ll get 7 shots of it in a small/flat/light weight 380 versus 5 shots out of a bulkier 38 SPL J frame revolver. Additionally, with the 380 you’ll get much faster reloads and the little magazines are flatter than a speed-loader used for a J frame.
This load is the direct result of customers wanting the deep penetration of the expanding Barnes X style bullet in a 380 auto+P load. See the below real world velocities from my stock real world pistols. We always use over-the-counter firearms to establish our velocities as using extra long laboratory test barrels gives false high velocity readings and is misleading to the customer who will be firing the ammunition in the real world, not a lab.

• 1231 fps – Browning Double Action-3.75 inch barrel
• 1235 fps – Walther PPK-3.5 inch barrel – (faster than longer barrel above, no typo)
• 1130 fps – Kel Tec PA3T-2.75 inch barrel
• 1136 fps – Kahr P380-2.75 inch barrel

The all copper, long-for-weight, Barnes bullet is so long that when seated to an OAL of .940 to .950 inch, the base of the bullet will make a slight bulge in the case, but this DOES NOT affect feeding or chambering as the bulge is not pronounced enough to cause any problems. In fact, that bulge provides enough resistance to the bullet base, to stop the bullet from being battered deeper into the case upon feeding, which is a very good thing. If we load to a longer cartridge OAL, to eliminate the bulge, the cartridge will be too long to fit some magazines. Feeding was 100% in our over-the-counter test guns.

While taking advantage of state of the art testing equipment, this high performance ammunition by Underwood is field tested using popular, real firearms that customers are most likely to own out in the real world with all the elements you would experience. If for some reason Underwood Ammunition fails to meet performance expectations, Underwood stands by their product 100% and will make sure the customer is satisfied with every purchase. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.

The Underwood nickel plating process provides several key benefits including; improved feeding in all actions of firearms, enhanced corrosion resistance over traditional brass, improved cosmetics, and ease of cleanup during reloading. Nickel plated casings will not tarnish like brass during storage or when in contact with foreign materials such as leather, moisture, and other metals. Until the development of the Ducta-Bright 7a process, nickel plating casings often limited the number of reloads as compared to raw brass. It was claimed that nickel plated brass casings embrittled the brass therefor making it less desirable for reloaders despite the ease of cleanup that nickel plating offers. In addition, ammunition engineers raising concerns of using nickel plating in very hot +P or magnum loads found that traditional nickel plating often cracked deep-drawn cases, or worse, lead to a total failure. This new process eliminates any concern, to the shooter or reloader, of hazard or ability to re-use the brass.

The Lehigh Xtreme Penetrator bullet features progressive nose geometry, which allows for deep, straight penetration while creating a permanent wound cavity diameter exceeding that of most expanding bullets. To top it off, the bullet is solid copper and is able to overcome barriers to penetration; environmentally friendly, target unfriendly, very unfriendly, downright obnoxiously unfriendly. The magic happens with the nose design where the radial flutes force the hydraulic energy inward and then as the energy is restricted, it accelerates outward creating high pressure spikes damaging surrounding tissue. Kind of similar to sticking your thumb over a garden hose. The permanent wound cavity of the XP is from two to four times greater than what a flat or ball nose bullet generates and often larger than traditional expanding bullets. So what you get is exceptional penetration coupled with a larger permanent wound cavity. The solid copper alloy construction will not deform when contacting hard surfaces like a lead jacketed bullet will do nor will it fragment as some hard cast lead bullets are prone to do. What it will do is overcome surface barriers and penetrate straight and deep while creating a massive wound channel.

Suppressor Safe— The projectile is machined from solid bar stock. This is not a frangible bullet produced from powdered metal.

Features

• Progressive nose geometry for deep, straight penetration
• CNC machined from solid copper to overcome barriers to penetration
• Radial flutes that force the hydraulic energy inward to build pressure
• A permanent wound cavity that is 2 to 4 times greater than flat or ball nose bullets

With a reloadable brass case, CCI primers and Speer bullets, Lawman Ammunition is a great combination of economy and performance. Perfect for training or target practice when you don’t need an expensive hollow point bullet. This ammunition is new production, non-corrosive, in boxer primed, reloadable brass cases.